mhpmcounter11

Machine Hardware Performance Counter 11

Programmable hardware performance counter.

The hpmcounter11 CSR is a read-only shadow of this CSR. Access to hpmcounter11 is controlled with mcounteren.HPM11 , scounteren.HPM11 , and hcounteren.HPM11 as follows:

mcounteren.HPM11	scounteren.HPM11	hcounteren.HPM11	hpmcounter11 behavior
S-mode	U-mode	VS-mode	VU-mode
0	-	-	`IllegalInstruction`	`IllegalInstruction`	`IllegalInstruction`	`IllegalInstruction`
1	0	0	read-only	`IllegalInstruction`	`VirtualInstruction`	`VirtualInstruction`
1	1	0	read-only	read-only	`VirtualInstruction`	`VirtualInstruction`
1	0	1	read-only	`IllegalInstruction`	read-only	`VirtualInstruction`
1	1	1	read-only	read-only	read-only	read-only

mcounteren.HPM11

scounteren.HPM11

hcounteren.HPM11

hpmcounter11 behavior

S-mode

U-mode

VS-mode

VU-mode

IllegalInstruction

read-only

IllegalInstruction

VirtualInstruction

read-only

VirtualInstruction

read-only

IllegalInstruction

read-only

VirtualInstruction

read-only

Attributes

CSR Address	0xb0b
Defining extension	Sm
Length	64-bit
Privilege Mode	M

CSR Address

0xb0b

Defining extension

Length

64-bit

Privilege Mode

Format

Figure 1. mhpmcounter11 format

Field Summary

Name Location Type Reset Value

Name	Location	Type	Reset Value
`COUNT`	63:0	RO	0

COUNT

63:0

Fields

`COUNT`

Location: mhpmcounter11[63:0]
Description

Performance counter for event selected in mhpmevent11.EVENT.

+ Increments every time event occurs unless:

+ * mcountinhibit.HPM11 or its alias scountinhibit.HPM11 is set * mhpmevent11.MINH is set and the current privilege level is M * mhpmevent11.SINH or its alias hpmevent11.SINH is set and the current privilege level is (H)S * mhpmevent11.UINH or its alias hpmevent11.UINH is set and the current privilege level is U * mhpmevent11.VSINH or its alias hpmevent11.VSINH is set and the current privilege level is VS * mhpmevent11.VUINH or its alias hpmevent11.VUINH is set and the current privilege level is VU

Unimplemented performance counter. Must be read-only 0 (access does not cause trap).

Type

RO	Read-Only Field has a hardwired value that does not change. Writes to an RO field are ignored.

Reset value: 0

Software read

This CSR may return a value that is different from what is stored in hardware.

Pruned
Original

return 0;

if (HPM_COUNTER_EN[11]) {
  return read_hpm_counter(11);
} else {
  return 0;
}