mhpmcounter30

Machine Hardware Performance Counter 30

Programmable hardware performance counter.

The hpmcounter30 CSR is a read-only shadow of this CSR. Access to hpmcounter30 is controlled with mcounteren.HPM30 , scounteren.HPM30 , and hcounteren.HPM30 as follows:

mcounteren.HPM30	scounteren.HPM30	hcounteren.HPM30	hpmcounter30 behavior
S-mode	U-mode	VS-mode	VU-mode
0	-	-	`IllegalInstruction`	`IllegalInstruction`	`IllegalInstruction`	`IllegalInstruction`
1	0	0	read-only	`IllegalInstruction`	`VirtualInstruction`	`VirtualInstruction`
1	1	0	read-only	read-only	`VirtualInstruction`	`VirtualInstruction`
1	0	1	read-only	`IllegalInstruction`	read-only	`VirtualInstruction`
1	1	1	read-only	read-only	read-only	read-only

mcounteren.HPM30

scounteren.HPM30

hcounteren.HPM30

hpmcounter30 behavior

S-mode

U-mode

VS-mode

VU-mode

IllegalInstruction

read-only

IllegalInstruction

VirtualInstruction

read-only

VirtualInstruction

read-only

IllegalInstruction

read-only

VirtualInstruction

read-only

Attributes

CSR Address	0xb1e
Defining extension	Sm
Length	64-bit
Privilege Mode	M

CSR Address

0xb1e

Defining extension

Length

64-bit

Privilege Mode

Format

Figure 1. mhpmcounter30 format

Field Summary

Name Location Type Reset Value

Name	Location	Type	Reset Value
`COUNT`	63:0	RO	0

COUNT

63:0

Fields

`COUNT`

Location: mhpmcounter30[63:0]
Description

Performance counter for event selected in mhpmevent30.EVENT.

+ Increments every time event occurs unless:

+ * mcountinhibit.HPM30 or its alias scountinhibit.HPM30 is set * mhpmevent30.MINH is set and the current privilege level is M * mhpmevent30.SINH or its alias hpmevent30.SINH is set and the current privilege level is (H)S * mhpmevent30.UINH or its alias hpmevent30.UINH is set and the current privilege level is U * mhpmevent30.VSINH or its alias hpmevent30.VSINH is set and the current privilege level is VS * mhpmevent30.VUINH or its alias hpmevent30.VUINH is set and the current privilege level is VU

Unimplemented performance counter. Must be read-only 0 (access does not cause trap).

Type

RO	Read-Only Field has a hardwired value that does not change. Writes to an RO field are ignored.

Reset value: 0

Software read

This CSR may return a value that is different from what is stored in hardware.

Pruned
Original

return 0;

if (HPM_COUNTER_EN[30]) {
  return read_hpm_counter(30);
} else {
  return 0;
}