mhpmcounter25
Machine Hardware Performance Counter 25
Programmable hardware performance counter.
The hpmcounter25 CSR is a read-only shadow of this CSR. Access to hpmcounter25 is controlled with mcounteren.HPM25 , scounteren.HPM25 , and hcounteren.HPM25 as follows:
hpmcounter25 behavior |
||||||
|---|---|---|---|---|---|---|
S-mode |
U-mode |
VS-mode |
VU-mode |
|||
0 |
- |
- |
|
|
|
|
1 |
0 |
0 |
read-only |
|
|
|
1 |
1 |
0 |
read-only |
read-only |
|
|
1 |
0 |
1 |
read-only |
|
read-only |
|
1 |
1 |
1 |
read-only |
read-only |
read-only |
read-only |
Fields
COUNT
- Location
-
mhpmcounter25[63:0] - Description
Performance counter for event selected in mhpmevent25.EVENT.
+ Increments every time event occurs unless:
+
* mcountinhibit.HPM25 or its alias scountinhibit.HPM25 is set
* mhpmevent25.MINH is set and the current privilege level is M
* mhpmevent25.SINH or its alias hpmevent25.SINH is set and the current privilege level is (H)S
* mhpmevent25.UINH or its alias hpmevent25.UINH is set and the current privilege level is U
* mhpmevent25.VSINH or its alias hpmevent25.VSINH is set and the current privilege level is VS
* mhpmevent25.VUINH or its alias hpmevent25.VUINH is set and the current privilege level is VU
+
Unimplemented performance counter. Must be read-only 0 (access does not cause trap).
- Type
RO |
Read-Only Field has a hardwired value that does not change. Writes to an RO field are ignored. |
- Reset value
-
0
Software read
This CSR may return a value that is different from what is stored in hardware.
-
Pruned
-
Original
return 0;if (HPM_COUNTER_EN[25]) {
return read_hpm_counter(25);
} else {
return 0;
}